main subpage

  • Home
  • Process Chiller W-60-4700

Process Chiller, Water-Cooled: W-60-4700

GM chiller face righ Small 72dpi

Thermonics specializes in the design and manufacture of low temperature standard and custom fluid chillers for challenging applications. The W-60-4700 FluidChill™ system is a low-temp, water-cooled chiller delivering high reliability and precision temperature control.

Chiller Specifications

Cooling and Heating Capacity

Cooling Capacity°C +25 0 -20 -40 -60
kW 6.8 6.8 6.2 5.4 4.7
Condenser Water-cooled
Process Heater 1.7kW
Fluid Range -60 to +50°C
Fluid Stability ±0.5°C (at rated load)

Pump and Process Fluid

Pump Gear or Turbine
Process Fluid Syltherm XLT
Wetted Materials Copper or Stainless Steel
Flow Rate 8 GPM (30.2 LPM) at 50 PSIG
Available Pressure 50 PSIG (or less)
Fluid Connections 0.75” NPT

Controls and Compliance

User Interface 5.7” color touch-screen with temperature graphing and charting
Temperature Resolution 0.1°C full scale
Remote Communications Ethernet, Serial, USB
Alarms Low Flow, Low Reservoir, Out-of-temp Range, Drip Tray
Diagnostics Runtime hours (controller, chiller, compressor, pump), system performance log, valve activation counts, enclosure temperature
Compliance CE / RoHS / designed to meet UL1995/UL61010

Operating Requirements

Ambient Temperature Range 10 to 40°C
Power Requirement 3-phase, 208 to 230V, 60Hz
Facility Water Requirements Flow: 10.5 to 12.5 GPM (39.7 to 47.3)
Temperature: 10 to 32°C (20°C nominal)
Pressure: 10 to 50 PSIG
Connection: 0.75” NPT
System Dimensions
43”W X 60”D X 71”H (109.2 X 152.4 X 180.3 cm)

Cooling capacity with 50Hz power reduced by approximately 17%.
Consult factory for applications using other heat transfer fluids and flow rates.
Specifications subject to change.

Download Chiller Data Sheet

© 2019 Thermonics Corporation, an inTEST Company  All Rights Reserved            Facebook60pxIcon