Process Chiller, Water-Cooled: W-40-3100
Thermonics specializes in the design and manufacture of low temperature standard and custom fluid chillers for challenging applications. The W-40-3100 FluidChill™ system is a low-temp, water-cooled chiller delivering high reliability and precision temperature control.
Download Chiller Data Sheet
Cooling and Heating Capacity
|Fluid Range||-40 to +50°C|
|Fluid Stability||±0.5°C (at rated load)|
Pump and Process Fluid
|Pump||Gear or Turbine|
|Process Fluid||Compatible with a variety of process fluids.
Specifications achieved using Syltherm XLT.
|Wetted Materials||Copper or Stainless Steel|
|Flow Rate||10 GPM (38.0 LPM) at 50 PSIG|
|Available Pressure||50 PSIG (or less)|
|Fluid Connections||0.75” NPT|
Controls and Compliance
|User Interface||5.7” color touch-screen with temperature graphing and charting|
|Temperature Resolution||0.1°C full scale|
|Remote Communications||Ethernet, Serial, USB|
|Alarms||Low Flow, Low Reservoir, Out-of-temp Range, Drip Tray|
|Diagnostics||Runtime hours (controller, chiller, compressor, pump), system performance log, valve activation counts, enclosure temperature|
|Compliance||CE / RoHS / designed to meet UL1995/UL61010|
|Ambient Temperature Range||10 to 40°C|
|Power Requirement||3-phase, 208 to 230V, 60Hz|
|Facility Water Requirements||Flow: 7.0 to 12.0 GPM (26.5 to 45.4 LPM)
Temperature: 10 to 32°C (20°C nominal)
Pressure: 10 to 50 PSIG
Connection: 0.75” NPT
|31”W X 48”D X 64”H (78.7 X 121.9 X 162.5 cm)|
Cooling capacity with 50Hz power reduced by approximately 17%.
Consult factory for applications using other heat transfer fluids and flow rates.
Specifications subject to change.