
Thermonics specializes in the design and manufacture of ultra-low temperature standard and custom fluid chillers for challenging applications. The A-80-2400 FluidChill™ system is an ultra-low temperature, high capacity, air-cooled chiller delivering high reliability and precision temperature control.
Chiller Specifications
Cooling and Heating Capacity
Cooling Capacity | °C |
+25 |
0 |
-20 |
-40 |
-80 |
kW |
5.0 |
5.0 |
4.5 |
3.9 |
2.4 |
Condenser |
Air-cooled |
Process Heater |
1.7kW |
Fluid Range |
-85 to +50°C |
Fluid Stability |
±0.5°C (at rated load) |
Pump and Process Fluid
Pump |
Gear |
Process Fluid |
HFE-7100 |
Wetted Materials |
Copper or Stainless Steel |
Flow Rate |
8 GPM (30.3 LPM) at 50 PSIG |
Available Pressure |
50 PSIG (or less) |
Fluid Connections |
0.75” NPT |
Controls and Compliance
User Interface |
5.7” color touch-screen with temperature graphing and charting |
Temperature Resolution |
0.1°C full scale |
Remote Communications |
Ethernet, Serial, USB |
Alarms |
Low Flow, Low Reservoir, Out-of-temp Range, Drip Tray |
Diagnostics |
Runtime hours (controller, chiller, compressor, pump), system performance log, valve activation counts, enclosure temperature |
Compliance |
CE / RoHS / designed to meet UL1995/UL61010 |
Operating Requirements
Ambient Temperature Range |
10 to 40°C 10 to 32°C (25°C nominal) |
Power Requirement |
3-phase, 208 to 230V, 60Hz |
System Dimensions (approximate) |
43”W X 60”D X 71”H (109.2 X 152.4 X 180.3 cm) |
Cooling capacity with 50Hz power reduced by approximately 17%.
Consult factory for applications using other heat transfer fluids and flow rates.
Specifications subject to change.