Portable Process Chiller, Air-Cooled: A-60-3000
Thermonics specializes in the design and manufacture of low temperature standard and custom fluid chillers for challenging applications. The A-60-3000 FluidChill™ system is a low-temperature, air-cooled chiller delivering high reliability and precision temperature control.
Chiller Specifications
Cooling and Heating Capacity
| Cooling Capacity | °C | +25 | 0 | -20 | -40 | -60 |
|---|---|---|---|---|---|---|
| kW | 4.6 | 4.6 | 3.7 | 3.5 | 3.0 | |
| Condenser | Air-cooled | |||||
| Process Heater | 1.7kW | |||||
| Fluid Range | -60 to +50°C | |||||
| Fluid Stability | ±0.5°C (at rated load) | |||||
Pump and Process Fluid
| Pump | Gear or Turbine |
|---|---|
| Process Fluid | Compatible with a variety of process fluids. Specifications achieved using Syltherm XLT. |
| Wetted Materials | Copper or Stainless Steel |
| Flow Rate | 6 GPM (22.7 LPM) at 50 PSIG |
| Available Pressure | 50 PSIG (or less) |
| Fluid Connections | 0.75” NPT |
Controls and Compliance
| User Interface | 5.7” color touch-screen with temperature graphing and charting |
|---|---|
| Temperature Resolution | 0.1°C full scale |
| Remote Communications | Ethernet, Serial, USB |
| Alarms | Low Flow, Low Reservoir, Out-of-temp Range, Drip Tray |
| Diagnostics | Runtime hours (controller, chiller, compressor, pump), system performance log, valve activation counts, enclosure temperature |
| Compliance | CE / RoHS / designed to meet UL1995/UL61010 |
Operating Requirements
| Ambient Temperature Range | 10 to 40°C 10 to 32°C (25°C nominal) |
|---|---|
| Power Requirement | 3-phase, 208 to 230V, 60Hz |
| System Dimensions (approximate) |
31.0”W X 48.0”D X 64.0”H (78.7 X 121.9 X 162.5 cm) |
Cooling capacity with 50Hz power reduced by approximately 17%.
Consult factory for applications using other heat transfer fluids and flow rates.
Specifications subject to change.
© 2019 Thermonics Corporation, an inTEST Company All Rights Reserved 
